RP-2801 supports the Simple Network Management Protocol (SNMP), which allows to remote printer management and to send warning notice. A standard SNMP agent is permanent on these print servers. Any standard SNMP-based application can be used to access and manage these print servers. The print server provides an embedded web server which can be accessed via web browser, and it also supports subsidiary Windows-based PSAdmin utility which helps administrator to setup print server environment, e.g. Netware, Windows 95/98/ME/NT/2000/XP/2003, Mac or Linux system.
Funkcje:
Standards | ‧IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX | |
Interfaces | ‧1 * DB-36-pin male Centronics port, supporting bi-directional ‧1 * RJ-45 10/100M port |
|
Hardware | ‧High-performance RISC-cored SoC processor Winbond ARM7-based W90N740 ‧Flash: 1MB, System memory: 2MBytes SDRAM |
|
OS Support | ‧Windows 95/98/98SE/Me, Windows NT 4.0/2000/XP, Mac OS 8.1 or higher, UNIX/Linux, NetWare (Bindery/NDS) | |
Protocol Support | ‧TCP/IP, IPX, NetBEUI, AppleTalk, LPR, SMB over IP, RawTCP 9100 | |
Management | ‧Web interface ‧Windows-based Setup Program |
|
Default IP Address | ‧192.168.010; DHCP: off | |
Software Upgradeable |
‧Web interface ‧Window-based Setup Program, TFTP |
|
LED Indicators | ‧Power/Status: Orange ‧LAN Link: Yellow for 10Mbps, Green for 100Mbps |
|
Power Adapter | ‧External power Adapter DC3.3V, 2A | |
Environment | ‧Operating Temperature:0°C ~ 50°C ‧Operating Humidity:0% ~ 70% |
|
Dimension | ‧55.5 * 52 * 22 mm | |
Certification | ‧FCC, CE |